Tuesday, January 29, 2013

Easy, Wire Heart Earrings: DIY


And the Hearts continue.
If you are just joining in,  every DIY I do  from now  until February 14, will have a heart in it.
I am having so much fun coming up with new ideas.

Tutorial 
Things you need.
  1. 20 Gauge Wire *Wal-mart or Michaels
  2. Pliers
 Cut your wire about  3 1/2 to 4 inches long.


 Make a V


 Shape your wire like a heart.


  I lift up the middle and using my pliers,  twist the middle over itself.



 Like the picture above.
The wire is very forgiving so you can shape it pretty easily.



Then on one side, using my pliers, I curled it up.

Then repeat with the other wire.



I have a couple of other shapes I am experimenting with.
Have a wonderful Tuesday!
<3<3<3

Lots of <3,
Anne.


Sunday, January 27, 2013

Glitter, Striped Heart Sweatshirt, DIY



 Tutorial
 Things you need.
  1.  Glitter in three colors Dark, Medium, Light. any color *I uses the red hues in  Martha Stewart glitter:  Garnet, Tourmaline and  Rose quart. * Michaels
  2. Fabric- tac glue or Mod podge fabric glue. *Wal-mart or Michaels
  3.  Small paint brush.
  4. Masking tape.
  5. Scissors
  6. Sweatshirt. *I used a men's small Hanes. *Wal-mart or Target

 Wash your sweatshirt and dry it.
 Cut off the collar.




Cut out a template of a heart.
Make it as big and as little as you want.
Place it in the center of you sweatshirt.



 Tape the heart down on your shirt. 
Then put down strips of tape.



 Take off every other strip of tape.


 Put a piece of cardboard in between the sweatshirt.



Put glue on the open stripes and sprinkle with your glitter.



 I did two stripes of each color.



 let dry.. shake off the glitter and repeat the glue/ glitter process again.



 Carefully peel off your tape.
To Seal the glitter in put a thin layer of Mod Podge Fabric Glue on the glitter stripes.
Let dry for about 48 hours before washing. 
Wash in cold water tumble dry on low heat or hang dry.





I put a stud at the seams so I didn't have to sew them.




Hello Heart.

Have a wonderful Sunday.
Lots of <3,
Anne


Wednesday, January 23, 2013

Hearts From The Past.

I thought I would re-post a few of my heart projects from the past.
 Happy Wednesday!


Heart Bracelet
Go HERE


Heart Shirt

Heart Garland
Go HERE

Lots of <3.
Anne

Tuesday, January 22, 2013

Three Heart Neacklace. DIY

  

Tutorial.
 Things you need.

  1. Pliers
  2. 20 Gauge Wire * Wal-mart
  3. Clasp
  4. 4 jump rings: *3 medium, 1 large one
  5. Chain 14 inches.

 Cut three pieces of wire about 4 inches.

     Shape them into hearts.


 connect them together



At the bottom of the heart,
 wrap one of the wires around the other three times.




 do that to all three hearts.


Cut your 14 inch wire in half.


Attach one of the medium jump rings to one of the chains then attach that to one of the hearts.
Repeat that on the other side.


Attach the third medium jump ring and the clasp to the other end of the chain.
Then attach the large jump ring to the other chain.

Trim off the excess wire from the bottom of the hearts.

 Hello Hearts.
Make a heart for someone you love.


Happy Tuesday.
Lots of <3,
Anne

Wednesday, January 16, 2013

Sweetheart, Wire Rings. DIY

I have made a couple of different wire rings,  this is my first heart wire ring DIY.

Tutorial 
Things you need.
  1. 20 gauge wire *Wal-mart
  2. Candle
  3. Pliers
Cut your wire about 4 inches.

Make a V

Using your fingers shape the heart

Wrap one of the wires around the other about three times. 
Cut off excess wire.


Now bend up the middle and carefully twist the wire over itself


looks like this.


Cut another piece of wire about 5 inches long.
Wrap one end around one side of the wire three times.


Now wrap the wire around your candle.


wrap the other end of the wire around the other side of the heart three times, trim off excess wire
This can be tricky but the wire is very forgiving.  Adjust the wire to your finger.

Sweet little gifts for Valentine's Day.

Have a wonderful Wednesday.
Lots of <3,
Anne

More Wire Rings
HERE

HERE

HERE